Welcome

G1 Clear Vision Smart Glass

More Views

G1 Clear Vision Smart Glass

Availability: In stock



  • Hydrophobic



  • Durable chemical bond

  • Last up to 20,000 miles


 

G1 Clear Vision Smart Glass

G1 Clear vision smart glass 15ml

$33.00
G1 Clear Vision Smart Glass

G1 Clear vision smart glass 100ml

$99.00
Additional Information

Additional Information

MSDS

Take a look at the Material Safety Data Sheet for G1

Application Information

Use and Storage

 

 

Make sure you are working in a well ventilated area,  in a temperature that is 5°c or above

Wear gloves and do not apply in direct sunlight

Clean all glass you are going to protect with G6 Perfect Glass and an MF5 Power Glass Cloth

For best results machine polish the glass with G4 Nano Glass Polish and a medium pad. Or alternatively, polish the glass with G4 Nano Glass Polish and a hand polishing pad. Apply a small amount and polish in a circular motion

Once finished, clean the glass back to a shine with G6 Perfect Glass and an MF5 or MF1 ZeroR Microfibre Buff Cloth - repeat this as many times as needed to remove all residue

Shake bottle well before use

For windscreens we recommend using 3 layers of G1, but for side and rear screens only 1 layer is needed

Apply a liberal amount of G1 to an AP1 Lint-Free Applicator Pad

Work product into the glass in a circular motion covering all of the glass, and leave to cure for 5 minutes

Using a new AP1 apply the same amount of product to the pad, but this time put G1 over your previous layer in a side to side motion, leave for a further 5 minutes to cure

Apply your third layer with the same amount of product on an AP1, however this time apply in vertical straight lines, leave to cure for 15 minutes

 

Remove cured residue, with G2 Residue Remover. Dab the G2 onto the remaining applicator and apply to a small area at a time, then buff the glass immediately with an MF1 cloth

Finish by cleaning the wiper blades and glass with G6 Perfect Glass and an MF5

We recommend you apply a layer of G1 on your wiper blades without removing residue. If wiper blades are worn they should be replaced

Do not expose your car to the elements for at least 3 hours

Store in a cool, dry place

Use G1 and G2 within 3 months of opening

There may be some wiper blade judder, in 90% of cases this will disappear within two weeks. Please take a look at our FAQ section if this problem persists

 

Width in cm. No
Reviews
Product Description MSDS Application Information