Welcome

I1 Smart Fabric AB

More Views

I1 Smart Fabric AB

Availability: In stock


  • Lasts for up 12 months

  • Anti bacterial and anti mould

  • Flurocarbon free


 

I1 Smart Fabric AB

I1 Smart fabric coat AB 250ml

$36.30
I1 Smart Fabric AB

I1 Smart fabric coat AB 500ml

$60.50
I1 Smart Fabric AB

I1 Smart fabric coat AB 1 litre

$99.00
I1 Smart Fabric AB

I1 Smart fabric coat AB 5 litre

$407.00
Additional Information

Additional Information

MSDS

Take a look at the Material Safety Data Sheet for I1AB

Application Information

Storage and use

 

If using on an interior surface, use I2 TriClean to prepare the surface you are going to treat

 

For exterior use, use W5 Citrus All Purpose Cleaner neat for dirty surfaces, or dilute at a ratio of 5:1 with water for less soiled areas

 

Make sure the surface you have cleaned is thoroughly dry (for best results 48 hours in good drying conditions) before applying I1 Smart Fabric. For the optimal impregnation of I1 into your fabric, its moisture content must be below 15% which is significantly dryer than touch dry

 

Shake well before use and wear gloves

 

Apply at a temperature of 5°c or above, in a well ventilated area

 

Use out of direct sunlight

 

Apply by spraying evenly from a distance of about 15cm ensuring thorough saturation of the surface you are covering.

 

Make sure your application is thorough as once Smart Fabric has dried, you cannot apply a second coat, as the first coat will repel additional product

 

Avoid over spraying on surrounding substrates, if this happens, wipe immediately with a MF1 ZeroR Microfibre Buff Cloth. Also wipe any excess from the fabric with an MF1

 

Leave to dry for 24 hours, after this time the full effectiveness of the product will be achieved

 

Store in a cool, dry place

 

Use within 12 months of opening

 

Width in cm. No
Reviews
Product Description MSDS Application Information