Welcome

I1 Smart Fabric

More Views

I1 Smart Fabric

Availability: In stock


  • Lasts up to 12 months

  • No change to fabric feel

  • Flurocarbon free


 

I1 Smart Fabric

I1 Smart fabric coat 250ml

$29.70
I1 Smart Fabric

I1 Smart fabric coat 500ml

$55.00
I1 Smart Fabric

I1 Smart fabric coat 1 litre

$93.50
I1 Smart Fabric

I1 Smart fabric coat 5 litre

$374.00
Additional Information

Additional Information

MSDS

Take a look at the Material Safet Data Sheet for I1

Application Information

Storage and use

 

 If using on an interior surface, use I2 TriClean to prepare the surface you are going to treat

For exterior use, use W5 Citrus All Purpose Cleaner neat for dirty surfaces, or dilute at a ratio of 5:1 with water for less soiled areas

Make sure the surface you have cleaned is thoroughly dry (for best results 48 hours in good drying conditions) before applying I1 Smart Fabric. For the optimal impregnation of I1 into your fabric, its moisture content must be below 15% which is significantly dryer than touch dry

Shake well before use and wear gloves

Apply at a temperature of 5°c or above, in a well ventilated area

Use out of direct sunlight

Apply by spraying evenly from a distance of about 15cm ensuring thorough saturation of the surface you are covering.

Make sure your application is thorough as once Smart Fabric has dried, you cannot apply a second coat, as the first coat will repel additional product

Avoid over spraying on surrounding substrates, if this happens, wipe immediately with a MF1 ZeroR Microfibre Buff Cloth. Also wipe any excess from the fabric with an MF1

Leave to dry for 24 hours, after this time the full effectiveness of the product will be achieved

Store in a cool, dry place

Use within 12 months of opening

Width in cm. No
Reviews
Product Description MSDS Application Information