L1 Leather Guard AB

	L1 Leather coat AB 100ml Quantity	$30.25
	L1AB Leather coat 500ml Quantity	$83.60

MSDS	Take a look at the Material Safety Data Sheet for L1AB
Application Information	Storage and use SHAKE WELL BEFORE USE For best results apply to new or recently recoloured leather If applying to used leather, first clean the leather using I2 Tri-Clean and allow to dry Spread a thin layer of L1 using a Gtechniq AP3 Dual Layered Soft Foam Applicator immediately removing any excess with a Gtechniq MF1 ZeroR Microfibre Buff Cloth and allow the product to dry for 30 minutes before use For the very best results clean and then reapply a coat of L1 on high wear areas For high use areas reapply L1 Leather Guard every 2 months and every 6 months for low use areas
Width in cm.	No

Why use Gtechniq L1 Leather Guard?

L1 Leather Guard forms a durable abrasion resistant matte finish which offers the best ever protection against abrasion damage, UV rays, dye transfer and other discolouration.

With added BioCote® antimicrobial technology, treated surfaces will kill 99.9% of bacteria.

Friction protection is particularly important on seat bolsters, seat piping and any other high wear areas. The anti stain function is most relevant for light coloured leathers which are typically stained by dark coloured fabrics such as indigo jeans.

Myth buster

Many leather products market themselves on how they feed leather, when in fact this is not needed. Modern automotive leather use synthetic fat liquors which do not evaporate. Any product that is designed to feed leathers will not be absorbed by modern automotive leathers but instead remain on the surface attracting dirt which will then act as an abrasive foreshortening the leather’s finish.

Take a look at the Material Safety Data Sheet for L1AB

Storage and use

SHAKE WELL BEFORE USE
For best results apply to new or recently recoloured leather
If applying to used leather, first clean the leather using I2 Tri-Clean and allow to dry
Spread a thin layer of L1 using a Gtechniq AP3 Dual Layered Soft Foam Applicator immediately removing any excess with a Gtechniq MF1 ZeroR Microfibre Buff Cloth and allow the product to dry for 30 minutes before use
For the very best results clean and then reapply a coat of L1 on high wear areas
For high use areas reapply L1 Leather Guard every 2 months and every 6 months for low use areas

More Views

Additional Information